SUPERVISORY GENERAL ENGINEER with Security Clearance
Summary You will serve as a SUPERVISORY GENERAL ENGINEER in the Head of the Equipment Branch (Code 1460.3), Technical Support Division (Code 1460), Naval Foundry and Propeller Center (Code 1400), Located at Philadelphia, PA a detachment of the NORFOLK NAVAL SHIPYARDDutieso You will provide engineering services and engineered processes to all divisions.o You will assist all divisions with engineering services for the identification of requirements and improvement of plant equipment.o You will conduct studies related to the development, improvement, consolidation, and modernization of facilities for equipment.o You will assign work to subordinate personnel, ensure timely completion and quality of work, and resolve conflicts.o You will resolve technical, scientific, engineering, and design problems, and make recommendations to supervision.o You will review completed work in order to determine adherence to controlling policies and adequacy in meeting assignment objectivesRequirements Conditions of Employmento Must be a US Citizen.o Must be determined suitable for federal employment.o Must participate in the direct deposit pay program.o New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification checkTo learn more about E-Verify, including your rights and responsibilities, visit e-verify.govo Generally, current federal employees applying for GS jobs must serve at least one year at the next lower grade levelThis requirement is called time-in-gradeTime-in-grade requirements must be met by the closing date of this announcement.o Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.o Males born after 12-31-59 must be registered for Selective Service.o You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on dutyFailure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.o You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.o Work is performed in areas where potentially harmful physical and chemical agents are present (e.gfumes, dust, heat, ionizing and non-ionizing radiation and chemicals)You will be required to participate in medical surveillance programs.o Supervisors in the executive branch have a heightened personal responsibility for advancing government ethicsYou will be required to review the 14 General Principles of Ethical Conduct at 5 CFR 2635.101Qualifications Your resume must demonstrate at least one year of specialized experience at or equivalent to the GS-12 grade level or pay band in the Federal service or equivalent experience in the private or public sectorSpecialized experience must demonstrate the following:
Experience understanding scientific and engineering principles of structural, mechanical, electrical/electronic and civil engineering in the application of plant equipment, acquisition, installation, maintenance, and repair and operation. Experience managing resources within cost and schedule budgets. Experience providing engineering services and engineered processes to all divisions. Experience assisting all divisions with engineering services for the identification of requirements and improvement of plant equipment. Experience providing engineering support for detachment work measurement systems including engineered labor standards by developing, preparing, issuing and maintaining standards. Experience determining requirements, developing specifications, initiating funding and procurement, and directing the installation and acceptance testing of plant equipment, machine tools, and test equipment. Experience conducting physical inventories and maintaining account records. Experience assigning work to subordinate personnel, ensuring timely completion and quality of work, resolving conflicts and overlapping functions between support personnel and other organizational entities, and coordinating the work of these personnel in the interest of designed objectives.Additional qualification information can be found from the following Office of Personnel Management website:
https:
//www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series AND https:
//www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social)Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employmentEducation Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:
Successful completion of a professional engineering degreeTo be acceptable, the program must:
(1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics:
(a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronicsSuch education must demonstrate the knowledge, skills, and abilities necessary to do the work of the positionOR Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto RicoAbsent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at:
http:
//www.nspe.org OR Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the USOffice of Personnel ManagementFor more information, please visit:
http:
//www.nspe.org/Licensure/HowtoGetLicensed/index.htmlOR Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above)The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above) OR Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidanceOrdinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positionsAdditional information This position is covered by the Department of Defense Priority Placement ProgramAdditional vacancies may be filled by this announcementA tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointmentsFederal annuitant information:
The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitantsPolicy information may be found at:
http:
//www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf PPP applicants will be placed at the FPL, if determined Well Qualified (WQ)To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separationICTAP Applicants:
To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higherICTAP candidates must provide copies of all of the following documentation at the time of application:
1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty locationApplicants who do not provide this documentation will not receive consideration as an ICTAP candidateFor more information about ICTAP eligibility please review the following link:
Recommended Skills Architecture Civil Engineering Conflict Resolution Electronics Engineering Physics Ethics Apply to this job. Think you're the perfect candidate? Apply on company site $(document).ready( function() $(#ads-desktop-placeholder).html(
n
n
n Estimated Salary: $20 to $28 per hour based on qualifications.
Experience understanding scientific and engineering principles of structural, mechanical, electrical/electronic and civil engineering in the application of plant equipment, acquisition, installation, maintenance, and repair and operation. Experience managing resources within cost and schedule budgets. Experience providing engineering services and engineered processes to all divisions. Experience assisting all divisions with engineering services for the identification of requirements and improvement of plant equipment. Experience providing engineering support for detachment work measurement systems including engineered labor standards by developing, preparing, issuing and maintaining standards. Experience determining requirements, developing specifications, initiating funding and procurement, and directing the installation and acceptance testing of plant equipment, machine tools, and test equipment. Experience conducting physical inventories and maintaining account records. Experience assigning work to subordinate personnel, ensuring timely completion and quality of work, resolving conflicts and overlapping functions between support personnel and other organizational entities, and coordinating the work of these personnel in the interest of designed objectives.Additional qualification information can be found from the following Office of Personnel Management website:
https:
//www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series AND https:
//www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social)Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employmentEducation Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:
Successful completion of a professional engineering degreeTo be acceptable, the program must:
(1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics:
(a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronicsSuch education must demonstrate the knowledge, skills, and abilities necessary to do the work of the positionOR Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto RicoAbsent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at:
http:
//www.nspe.org OR Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the USOffice of Personnel ManagementFor more information, please visit:
http:
//www.nspe.org/Licensure/HowtoGetLicensed/index.htmlOR Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above)The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above) OR Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidanceOrdinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positionsAdditional information This position is covered by the Department of Defense Priority Placement ProgramAdditional vacancies may be filled by this announcementA tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointmentsFederal annuitant information:
The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitantsPolicy information may be found at:
http:
//www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf PPP applicants will be placed at the FPL, if determined Well Qualified (WQ)To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separationICTAP Applicants:
To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higherICTAP candidates must provide copies of all of the following documentation at the time of application:
1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty locationApplicants who do not provide this documentation will not receive consideration as an ICTAP candidateFor more information about ICTAP eligibility please review the following link:
Recommended Skills Architecture Civil Engineering Conflict Resolution Electronics Engineering Physics Ethics Apply to this job. Think you're the perfect candidate? Apply on company site $(document).ready( function() $(#ads-desktop-placeholder).html(
n
n
n Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
