SUPERVISORY INTERDISCIPLINARY ENGINEER with Security Clearance
Dutieso You will supervise a subordinate workforce assigned to design, coordinate, and monitor NFPC plant modernization, major maintenance, environmental and safety projects.
o You will ensure timely performance of a satisfactory amount and quality of work.
o You will serve as the technical expert providing direction on all NFPC facility issues overseeing equipment requirements and facilities.
o You will provide engineering oversight to maintain a workplace in compliance with the laws, statutes, and regulations governing the foundry and propeller manufacturing facility.
o You will assign and review work of subordinates based on priorities, selective consideration of difficulty and the requirements of assignments and the capabilities of employees.
o You will oversee NFPC facilities.
o You will plan work schedules, estimate completion dates, estimate manpower requirements, budgetary needs and request manpower assistance as required to ensure timely completion of workRequirements Conditions of Employmento Must be a US Citizen.
o Must be determined suitable for federal employment.
o Must participate in the direct deposit pay program.
o New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification checkTo learn more about E-Verify, including your rights and responsibilities, visit e-verify.
govo Generally, current federal employees applying for GS jobs must serve at least one year at the next lower grade levelThis requirement is called time-in-gradeTime-in-grade requirements must be met by the closing date of this announcement.
o Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
o Males born after 12-31-59 must be registered for Selective Service.
o You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on dutyFailure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
o Work is performed in areas where potentially harmful physical and chemical agents are present (e.
gfumes, dust, heat, ionizing and non-ionizing radiation and chemicals)You will be required to participate in medical surveillance programs.
o Supervisors in the executive branch have a heightened personal responsibility for advancing government ethicsYou will be required to review the 14 General Principles of Ethical Conduct at 5 CFR 2635.
101Qualifications Your resume must demonstrate at least one year of specialized experience at or equivalent to the GS-12 grade level or pay band in the Federal service or equivalent experience in the private or public sectorSpecialized experience must demonstrate the following:
o Experience applying engineering theory, concepts, principles, and practices related to the design, overhaul, maintenance, and operation of complex industrial manufacturing plant and related integral systems and general purpose facilities.
o Experience working with others who apply environmental and safety theories, concepts, principles, and practices to ensure compliance with federal, state, and local regulations.
o Experience modifying practices and/or equipment and techniques to help others solve environmental/safety problems such as emissions control, pollution, and abatement.
o Experience interpreting federal, state, and local laws and regulations and applying these standards to existing and new facilities.
o Experience communicating both orally and in writing to prepare reports and presentations, coordinate projects, resolve problems, and to represent the NFPC on all facility related issuesAdditional qualification information can be found from the following Office of Personnel Management website:
https:
//www.
opm.
gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series AND https:
//www.
opm.
gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.
pdf Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.
g.
, professional, philanthropic, religious, spiritual, community, student, social)Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employmentEducation Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:
Successful completion of a professional engineering degreeTo be acceptable, the program must:
(1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics:
(a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronicsSuch education must demonstrate the knowledge, skills, and abilities necessary to do the work of the positionOR Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto RicoAbsent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.
g.
, State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at:
http:
//www.
nspe.
org OR Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the USOffice of Personnel ManagementFor more information, please visit:
http:
//www.
nspe.
org/Licensure/HowtoGetLicensed/index.
htmlOR Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above)The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above) OR Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.
g.
, engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidanceOrdinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.
g.
, in interdisciplinary positionsAdditional information This position is covered by the Department of Defense Priority Placement ProgramAdditional vacancies may be filled by this announcementA tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointmentsFederal annuitant information:
The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitantsPolicy information may be found at:
http:
//www.
secnav.
navy.
mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.
pdf PPP applicants will be placed at the FPL, if determined Well Qualified (WQ)To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separationICTAP Applicants:
To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higherICTAP candidates must provide copies of all of the following documentation at the time of application:
1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty locationApplicants who do not provide this documentation will not receive consideration as an ICTAP candidateFor more information about ICTAP eligibility please review the following link:
https:
//www.
usajobs.
gov/Help/working-in-government/unique-hiring-paths/federal-employees/career-transition/ Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ)A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position.
o Benefits Help A career with the U.
Sgovernment provides employees with a comprehensive benefits packageAs a federal employee, you and your family will have access Recommended Skills Architecture Communication Electronics Engineering Physics Ethics Human Resources Apply to this job.
Think you're the perfect candidate? Apply on company site $('.
external-apply-email-saved').
on('click', function (event) window.
ExternalApply = window.
open('/interstitial?jobdid=j3v21n6sk5ltbwbd3t1', 'ExternalApply-j3v21n6sk5ltbwbd3t1'); ); Estimated Salary: $20 to $28 per hour based on qualifications.
o You will ensure timely performance of a satisfactory amount and quality of work.
o You will serve as the technical expert providing direction on all NFPC facility issues overseeing equipment requirements and facilities.
o You will provide engineering oversight to maintain a workplace in compliance with the laws, statutes, and regulations governing the foundry and propeller manufacturing facility.
o You will assign and review work of subordinates based on priorities, selective consideration of difficulty and the requirements of assignments and the capabilities of employees.
o You will oversee NFPC facilities.
o You will plan work schedules, estimate completion dates, estimate manpower requirements, budgetary needs and request manpower assistance as required to ensure timely completion of workRequirements Conditions of Employmento Must be a US Citizen.
o Must be determined suitable for federal employment.
o Must participate in the direct deposit pay program.
o New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification checkTo learn more about E-Verify, including your rights and responsibilities, visit e-verify.
govo Generally, current federal employees applying for GS jobs must serve at least one year at the next lower grade levelThis requirement is called time-in-gradeTime-in-grade requirements must be met by the closing date of this announcement.
o Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
o Males born after 12-31-59 must be registered for Selective Service.
o You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on dutyFailure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
o Work is performed in areas where potentially harmful physical and chemical agents are present (e.
gfumes, dust, heat, ionizing and non-ionizing radiation and chemicals)You will be required to participate in medical surveillance programs.
o Supervisors in the executive branch have a heightened personal responsibility for advancing government ethicsYou will be required to review the 14 General Principles of Ethical Conduct at 5 CFR 2635.
101Qualifications Your resume must demonstrate at least one year of specialized experience at or equivalent to the GS-12 grade level or pay band in the Federal service or equivalent experience in the private or public sectorSpecialized experience must demonstrate the following:
o Experience applying engineering theory, concepts, principles, and practices related to the design, overhaul, maintenance, and operation of complex industrial manufacturing plant and related integral systems and general purpose facilities.
o Experience working with others who apply environmental and safety theories, concepts, principles, and practices to ensure compliance with federal, state, and local regulations.
o Experience modifying practices and/or equipment and techniques to help others solve environmental/safety problems such as emissions control, pollution, and abatement.
o Experience interpreting federal, state, and local laws and regulations and applying these standards to existing and new facilities.
o Experience communicating both orally and in writing to prepare reports and presentations, coordinate projects, resolve problems, and to represent the NFPC on all facility related issuesAdditional qualification information can be found from the following Office of Personnel Management website:
https:
//www.
opm.
gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series AND https:
//www.
opm.
gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.
pdf Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.
g.
, professional, philanthropic, religious, spiritual, community, student, social)Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employmentEducation Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:
Successful completion of a professional engineering degreeTo be acceptable, the program must:
(1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics:
(a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronicsSuch education must demonstrate the knowledge, skills, and abilities necessary to do the work of the positionOR Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto RicoAbsent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.
g.
, State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at:
http:
//www.
nspe.
org OR Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the USOffice of Personnel ManagementFor more information, please visit:
http:
//www.
nspe.
org/Licensure/HowtoGetLicensed/index.
htmlOR Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above)The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above) OR Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.
g.
, engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidanceOrdinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.
g.
, in interdisciplinary positionsAdditional information This position is covered by the Department of Defense Priority Placement ProgramAdditional vacancies may be filled by this announcementA tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointmentsFederal annuitant information:
The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitantsPolicy information may be found at:
http:
//www.
secnav.
navy.
mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.
pdf PPP applicants will be placed at the FPL, if determined Well Qualified (WQ)To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separationICTAP Applicants:
To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higherICTAP candidates must provide copies of all of the following documentation at the time of application:
1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty locationApplicants who do not provide this documentation will not receive consideration as an ICTAP candidateFor more information about ICTAP eligibility please review the following link:
https:
//www.
usajobs.
gov/Help/working-in-government/unique-hiring-paths/federal-employees/career-transition/ Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ)A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position.
o Benefits Help A career with the U.
Sgovernment provides employees with a comprehensive benefits packageAs a federal employee, you and your family will have access Recommended Skills Architecture Communication Electronics Engineering Physics Ethics Human Resources Apply to this job.
Think you're the perfect candidate? Apply on company site $('.
external-apply-email-saved').
on('click', function (event) window.
ExternalApply = window.
open('/interstitial?jobdid=j3v21n6sk5ltbwbd3t1', 'ExternalApply-j3v21n6sk5ltbwbd3t1'); ); Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
